Skip to content
FREE SHIPPING ON ALL ORDERS
FREE SHIPPING
Weed Barrier Fabric - Heavy Grade - 5oz - 12' x 250' Roll

Weed Barrier Fabric - Heavy Grade - 5oz - 12' x 250' Roll

SKU FPPV12250
$939.57 - $939.57
$939.57
$939.57 - $939.57
$939.57
Free Shipping

Weed Barrier · Heavy Grade · 5 oz Hybrid · 12′ × 250′

Heavy grade weed barrier fabric on a 12′ × 250′ roll covering 3,000 square feet. The widest roll stocked, covering large open areas with the fewest seams. Constructed of both woven and non-woven fabrics — the strength of a woven with the permeability of a non-woven — with a fuzzy face that stabilizes mulch and 12″ planting stripes for layout.

Roll Size
12′ × 250′3,000 sq ft per roll
Construction
HybridTwo bonded fabrics
Weight
5 ozWoven + non-woven
Planting Stripes
12″Printed on the woven face
  • Woven strength, non-woven flow
  • Fuzzy face stabilizes mulch
  • 12″ planting stripes
  • Contractor grade & UV resistant
  • Free shipping on all orders

Free Shipping - Please submit a Quote Request for quantities larger than listed below.

Quantity Price Per Unit
(Free Shipping)
1 $939.57
2+ $892.59
3+ $845.61
10+ $798.63

01 Hybrid construction · 5 oz

Weed Barrier Fabric — Heavy Grade

When you want a thick, strong fabric that gives dependable weed control, this is it. This heavy grade weed barrier fabric is constructed of both woven and non-woven fabrics, which gives it the high strength of a woven with the permeability of a non-woven — two properties that normally force a compromise.

At 5 oz it is heavier than the hybrid fabrics usually sold under this description, and it is built for the jobs where a standard weed barrier gets shredded, punctured or simply grown through.

2fabrics bonded into one

Woven for strength, non-woven for permeability — you normally have to choose.

02 The trade-off it removes

Strength Or Flow. Usually Not Both.

A woven weed barrier is strong but passes water only through the gaps in the weave — and those same gaps are where weed roots eventually probe through. A non-woven passes water freely but tears. Bonding the two means moisture and air reach the soil while weed germination is blocked at the source, in a fabric that survives being walked on.

03 Worth knowing before you lay it

The Two Sides Do Different Jobs

This is not a symmetrical fabric, and knowing which face goes up changes how well it performs.

SideTextureWhat it does
Woven faceSmooth, with printed 12″ planting stripesCarries the strength.
The stripes let you lay out rows and plant spacing off the fabric instead of measuring.
Non-woven faceFuzzy, texturedGrips and stabilizes.
Holds against the soil so the fabric does not shift while you work, and anchors mulch on top against wind and rain.
The fuzzy side is the reason mulch stays put. On a slope or an exposed bed, mulch sliding off a slick fabric is a recurring maintenance job. A textured face gives it something to key into, which is a practical advantage a single-sided fabric simply cannot offer.

04 What you get

Benefits

  • Thick, strong fabric giving dependable weed control
  • Constructed of both woven and non-woven fabrics — strength plus permeability
  • Significantly more puncture and tear resistant than single-material alternatives
  • Fuzzy textured side stabilizes mulch and grips the soil
  • Planting stripes at 12″ spacing for convenient, precise layout
  • Moisture and airflow reach the plants while weed germination is blocked
  • Contractor grade and UV resistant
  • Non-biodegradable — will not rot or mildew, and resistant to rodent and insect damage
Why 5 oz matters. Weed barrier is usually specified light because it is going to be buried under mulch and forgotten. The failures happen at the exceptions — where it is walked on, where sharp stone sits on it, and where a heavy weed pushes at it for a season. Weight is what handles those.

05 Sizing

Available Roll Widths

Five widths, all on 250-foot rolls and all the same 5 oz fabric. Match the width to the bed and you cut seams, offcuts and labor together.

4′1,000 sq ft 5′1,250 sq ft 6′1,500 sq ft 8′2,000 sq ft 12′3,000 sq ft
Part numberRoll sizeSq ftBest for
FPPV042504′ × 250′1,000Borders, foundation beds and narrow runs — easiest to handle alone
FPPV052505′ × 250′1,250A slightly wider bed in a single pass
FPPV062506′ × 250′1,500Standard landscape beds and pathways
FPPV082508′ × 250′2,000Wide beds and commercial planting areas
FPPV1225012′ × 250′3,000The widest roll — large open areas with the fewest seams

06 Where it goes

Applications

Landscape beds Commercial landscaping Under river rock & stone Under bark & mulch Foundation beds Garden pathways Around shrubs & trees Retaining wall beds Outdoor nursery areas Raised bed surrounds Woodland paths Slopes & banks
Stone beds are where heavy grade earns its keep. River rock and crushed stone are exactly the conditions that puncture a lightweight fabric during installation, and the damage is done before the bed is even finished.

07 Installation

Three Steps

  1. Prepare the area. Remove all weeds and plants from the area. For increased protection, consider applying a pre-emergent herbicide before laying the fabric down.
  2. Lay, cut and pin. Unroll and cut the fabric to length. If overlapping, allow a 4″–6″ overlap. Cut an X slit where each plant will go. Secure with fabric staples, staggered at approximately one staple per 5 feet.
  3. Cover it. Finish with 3–4 inches of bark, mulch or stone to protect the fabric from ultraviolet light and give the project a finished look.
Cover it, even though it is UV resistant. The 3–4 inch mulch or stone layer is not just cosmetic — UV is what ages an exposed fabric, and a covered barrier keeps working far longer than one left bare in a bed.

08 You will also need

6″ Landscape Staples

The install calls for staples staggered at roughly one per 5 feet, along every edge, at every overlap and anywhere the fabric lifts. That is what keeps it flat against the soil while you spread mulch over it.

6″ landscape staples are the standard pin for this fabric, and they are sold separately — worth adding to the order rather than discovering the gap on install day.

View 6″ Landscape Staples

09 Documentation

Specification Sheet

Heavy grade weed barrier specification sheetPDF

10 Buying from us

Why Buy Weed Barrier Fabric From Landscape Discount

Contractor grade only

Professional-grade fabric designed for residential and commercial use alike. We never substitute another fabric or weight without the explicit consent of the customer.

Free shipping, every order

On every width and every quantity, with no threshold to reach and no freight surprise at checkout.

Five widths, one fabric

4′ through 12′ on 250-foot rolls, so the roll matches the bed rather than leaving you to seam and offcut around it.

We answer the phone

When you call you quickly reach a helpful, live person happy to answer your product and order questions. (M-F 5:00 am - 3:00 pm Pacific Time)

11 Common questions

Heavy Grade Weed Barrier FAQs

Which side goes up?
The smooth woven face with the printed planting stripes goes up; the fuzzy non-woven face goes down against the soil. The textured side grips the ground so the fabric does not shift while you work, and it also helps anchor mulch spread over the top.
What makes this different from a standard weed barrier?
Construction and weight. This is two fabrics in one — woven for strength, non-woven for permeability — at 5 oz. A standard barrier is a single material and lighter, so it either tears more easily or lets weed roots probe through the weave over time.
Does water get through it?
Yes. The non-woven layer acts as a filtration barrier, letting moisture and airflow reach the soil and the plant roots while blocking weed germination at the source. That is the advantage over plastic sheeting, which blocks water entirely.
What are the stripes for?
Layout. The woven face carries printed stripes at 12″ intervals, so rows and plant spacing come off the fabric rather than a tape measure. On a commercial bed or a long run that is most of the setting-out time saved.
How much fabric do I need?
All five widths are on 250-foot rolls: 1,000 sq ft for the 4′, 1,250 for the 5′, 1,500 for the 6′, 2,000 for the 8′ and 3,000 for the 12′. Allow extra for the 4″–6″ overlap between runs.
How much overlap do I need?
4 to 6 inches where runs meet. Overlap rather than butting the edges — a joint that opens is a direct route to daylight for whatever is underneath.
How many staples?
Stagger them at approximately one staple per 5 feet, along every edge, at every overlap and anywhere the fabric lifts. 6″ landscape staples are the standard pin and are sold separately.
Do I have to cover it with mulch?
It is recommended. Finish with 3 to 4 inches of bark, mulch or stone. That protects the fabric from ultraviolet light and gives the project a finished look — UV is what ages an exposed fabric fastest.
Will it stop weeds completely?
It blocks germination beneath it, which handles the weeds coming up through the soil. Seeds that land in the mulch on top can still root in that layer, so an occasional pull is normal. A pre-emergent herbicide before laying the fabric increases protection further.
Can I use it under river rock?
Yes, and that is one of the better reasons to choose heavy grade. Angular stone is what punctures lightweight fabric during installation, often before the bed is even finished.
What does shipping cost?
Nothing. Shipping is free on every order, at any quantity.