Skip to content
FREE SHIPPING ON ALL ORDERS
FREE SHIPPING
Paver Base Fabric
Paver Base Fabric
Paver Base Fabric
Paver Base Fabric
Paver Base Fabric
Paver Base Fabric
Paver Base Fabric

Paver Base Fabric

SKU FPE350625100
$570.08 - $1,892.91
$570.08
$570.08 - $1,892.91
$570.08
Free Shipping

Paver Base Fabric Material · Monofilament Woven · Three Roll Sizes

Monofilament woven paver base fabric built to reinforce paver patios and driveways. The woven structure holds a clean separation between the aggregate base and the native soil below, so base rock stays put instead of punching down into soft subgrade. Water passes straight through, which makes it the fabric to reach for on permeable pavement work. High tensile strength suits both residential and commercial installations.

Available Roll Sizes

6.25′ × 100′625 sq ft per roll
6′ × 300′1,800 sq ft per roll
12.5′ × 300′3,750 sq ft per roll
Construction
Monofilament100% polypropylene, woven
Grab Tensile
365 × 200 lbASTM D 4632, machine × cross direction
Flow
145 gpm/ft²Permittivity 2.1 sec-1, ASTM D 4491
Seam Overlap
18″ – 24″Depending on subgrade strength
  • Separates base rock from subgrade
  • Built for permeable paver systems
  • Contractor grade & UV resistant
  • Will not rot or mildew
  • Free shipping on all orders
Fixing staples: secure the fabric with 6″ landscape staples, staggered at roughly one staple per 5 feet, before any base material goes down.

Free Shipping - Please submit a Quote Request for quantities larger than listed below.

Quantity Price Per Unit

(Free Shipping)
1 $570.08
2+ $541.58
3+ $513.07
10+ $484.57

Why Base Fabric Matters

Permanent separation

Without a fabric layer, base rock migrates down into soft subgrade and fines work their way up into the base. The result is ruts, settling and a surface that fails years earlier than it should. A tight woven structure keeps the two layers apart for the life of the installation.

Built for real load

Lighter woven fabrics stretch and tear under aggregate load, letting rock punch straight through. At 365 × 200 lb grab tensile and 675 lb CBR puncture, this fabric holds its structure under rock, compaction equipment and vehicle traffic.

Less base rock

Installed correctly, a stabilization fabric spreads load laterally across the subgrade. That can cut the depth of base rock needed by up to 30% — real material savings on every project, not just on paper.

Water keeps moving

Permeable by design at 145 gpm/ft², with the flow-through rate permeable pavement systems depend on. Drainage stays intact while the base courses underneath hold their structural integrity.

Installation

  1. Prepare the subgrade. Level, smooth and compact the area before the fabric goes down. Remove sharp rocks and any other objects that could puncture the fabric during installation.
  2. Roll out and overlap. Unroll the fabric across the area and pull it taut. Overlap seams 18″ to 24″ depending on the strength of the subgrade, and secure with fabric staples staggered at roughly one staple per 5 feet.
  3. Backfill with crushed stone. Carefully place graded crushed stone onto the fabric. Properly installed woven paver base fabric can improve the long-term performance of the project by 50 to 70%.

Fabric Characteristics

  • High strength with excellent permittivity
  • Monofilament woven material
  • 100% polypropylene yarn
  • Produced from first quality raw material
  • Contractor grade
  • UV resistant — 90% strength retained at 500 hours
  • Non-biodegradable, will not rot or mildew
  • Resistant to rodent and insect damage

Specifications

Fabric PropertyTest MethodUnitsMinimum Average Roll Value
Grab Tensile StrengthASTM D 4632lbs./ft365 x 200
Grab ElongationASTM D 4632%24 x 10
Trapezoidal TearASTM D 4533lbs./ft115 x 75
CBR PunctureASTM D 6241lbs./ft675
Percent Open AreaCEO-02215%10
PermittivityASTM D 4491sec-12.1
PermeabilityASTM D 4491cm/sec.14
AOSASTM D 4751US Sieve40
Water FlowASTM D 4491gpm/ft²145
UV ResistanceASTM D 4355% Strength Retained @500 hours90

Values represent expected values at time of manufacture. Tensile, elongation and tear values are listed machine direction x cross direction.

Applications: permeable paver systems, paver patios and driveways, retaining wall base, hybrid base builds, French drains, and areas prone to water accumulation.